Microtest MICROSCANNER Especificações descarregar pdf (Página 16)

MicroScanner Pro

Users Manual

Patch Cable Wiremap

The Wiremap function can also be used to verify patch

cables.

1. Simply plug the two ends of a cable into the two

modular 8 jacks (MAIN and LOOPBACK) on

ICROSCANNER PRO.

2. To display the Wiremap screen, press the MODE

key until the word WIREMAP appears on the

screen.

If there are any miswires, the number of the faulty wire

will blink.

Length

The Length function measures the full length of a

twisted pair or coaxial cable. Twisted pair: If you are

measuring standard pair length, M

ICROSCANNER PRO will

determine whether the cable is open, shorted, or

connected to a hub.

Note

Accuracy of the length measurement is ± 4 %

or ±2 feet— whichever is greater. Any NVP

uncertainty is an additional error.

1. Connect the cable to be tested to the MAIN jack

(identified on the unit right above the modular 8

jack).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Sem comentários

Microtest MICROSCANNER Especificações Página 16